Set Up Datameer on MapR

Installating Datameer X on MapR

The Datameer X software is available for installation from your my.datameer archive repository located at my.datameer.com. You must have the MapR repository configured properly in order to install Datameer. See MapR documentation for instructions.

Datameer X is currently available for distribution for Mac, Redhat, Suse, Unbuntu, or Windows named mapr-zip.

Dependencies

Datameer X requires that mapr-core is available on the host machine and that a fully configured MapR cluster is connected to the host machine. These packages must be installed and the MapR services configured prior to installing mapr-zip.

Unless otherwise noted, all shell commands listed in this document should be run as the root user or via sudo where available.

Pre-installation

The Datameer X package built for MapR Hadoop distributions doesn't include native libs, so you need copy the libs from the cluster to Datameer X using the following command:

cp -r /opt/mapr/hadoop/<hadoop_version>/lib/ native <DATAMEER_HOME>/lib/

Reviewing the installation

Once the package has been installed successfully, the Datameer X service automatically starts and is ready for use on port 8080 of the host machine. Make sure to use a Flash-enabled and /wiki/spaces/DASSB100/pages/32569526864 when accessing this URL.

The Datameer X software is installed on the machine in /opt/datameer/datameer-3.1.1-mapr.

ppmclala@ubuntu:/opt/datameer/das-3.1.1-mapr$ ls -l
total 14812
drwxr-xr-x  3 root root     4096 2011-06-27 09:06 bin
drwxr-xr-x  2 root root     4096 2011-06-27 09:06 conf
drwxr-xr-x  2 root root     4096 2011-06-27 08:38 contexts
drwxr-xr-x  7 root root     4096 2011-06-27 09:06 data
drwxr-xr-x  5 root root     4096 2011-06-27 09:06 etc
drwxr-xr-x  2 root root     4096 2011-06-27 09:06 job-jar
drwxr-xr-x 13 root root     4096 2011-06-27 09:06 lib
drwxr-xr-x  3 root root     4096 2011-06-27 09:06 LICENSES
-rw-r--r--  1 root root     1061 2011-06-27 08:38 LICENSES.txt
drwxr-xr-x  2 root root     4096 2008-11-13 09:18 logs
drwxr-xr-x  2 root root     4096 2011-06-27 09:06 plugins
-rw-r--r--  1 root root 13157439 2011-06-27 08:38 plugin-sdk-3.1.1.zip
-rw-r--r--  1 root root    17125 2008-11-13 18:09 start.jar
-rw-r--r--  1 root root  1933022 2011-06-27 08:38 stripped-dap-3.1.1-job.jar
-rw-r--r--  1 root root        3 2011-06-27 08:38 VERSION
drwxr-xr-x  3 root root     4096 2011-06-27 09:06 webapps

All Datameer-related files are stored in this directory including control scripts and logs. The bin directory contains all executable scripts, most notably conductor.sh which controls the Datameer X server. You can also find SQL scripts for database initialization and various other tools. All logging output is directed to files in the logs directory, the most interesting of which is conductor.log. This is where the most valuable logging information related to running the Datameer X system will be written.

Errors During Installation

After installing the mapr-datameer package, if you see an error similar to:

ERROR Cidcache fs/client/fileclient/cc/cidcache.cc:1017 Thread: 1075886400 Lookup of volume mapr.cluster.root failed, error Connection reset by peer(104), CLDB: 172.16.148.131:7222 trying another CLDB

or in the Datameer X conductor.log

java.io.IOException: Could not create FileClient

then you have most likely installed Datameer X without first properly configuring a MapR cluster. Stop the Datameer X application with the following command:

/etc/init.d/das-conductor stop

Configure and start the MapR components and then re-start the Datameer X application using the command:

/etc/init.d/das-conductor start

Stopping and starting Datameer

Datameer X starts automatically upon successful installation. The mapr-datameer package also installs a script in /etc/init.d/das-conductor which can be used to control the Datameer X process.

In case Datameer X doesn't start automatically (only if you have experienced errors during installation), you can run the startup script located in /etc/init.d/das-conductor with the start option.

/etc/init.d/das-conductor start

This launches the server and starts a web application listening to http://localhost:8080/.

To stop a running instance of Datameer X use the stop option by entering the following command:

/etc/init.d/das-conductor stop

Another supported option is shown here:

Usage: /opt/datameer/das-1.3-mapr/bin/jetty.sh {start|stop|run|restart|check|supervise} [ CONFIGS ... ]

Logging In and Using Datameer

After activating your trial license, navigate to the Login screen either by clicking Login Now on the trial activation screen or by visiting port 8080 on the machine where Datameer X is installed. You can now login with the default administrator account by entering the credentials below and clicking Login.

Username	Password
admin	admin

Connecting Datameer X to a MapR Cluster with Zero Configuration HA for Resource Manager

MAPR Zero Configuration is automatically detected by Datameer X when the Hadoop Cluster is configured with MAPR grid mode.

As of Datameer X v6.1

An additional label with a checkmark is displayed on the cluster settings page when Zero Configuration HA is enabled.

Learn more about MapR's Zero Configuration Failover for the ResourceManager.

MapR Security

According to Enabling and Disabling Security Features and Getting started with MapR Security, MapR is runs cluster nodes and Java virtual machines (JVMs) with its own truststore.

That truststore is routed to:

-Djavax.net.ssl.trustStore=/opt/mapr/conf/ssl_truststore

The default password of this truststore might be set to mapr123.

If you want to know the location of the truststore that is used by MapR, use the following command:

ps -ef | grep "javax.net.ssl.trustStore"

This command shows all the Java processes which have a non-default truststore set.

To update this truststore or to trust an Amazon S3 certificate, you need the password of the ssl_truststore. Alternatively, you can overwrite the truststore to your own one.