Upgrade Guide

Upgrading From an Older Release

Datameer customers can download updated software versions from http://my.datameer.com

To upgrade from an older release, you should first back up your data. Then you will need to upgrade the application and upgrade the database.

Upgrading to version 6.3

Parquet is the new default storage format

If upgrading from a Datameer version before 6.1, we highly recommend first upgrading to Datameer 6.1  and /wiki/spaces/DAS60/pages/4631169606  

In 6.3, Datameer uses Parquet as its default storage format. While Datameer can still read data written in the sequence file format, all artifacts are now stored using the Parquet file format. Datameer still uses the sequence file format for writing intermediate files and preview files for performance reasons, but the final artifacts are saved using the Parquet format. Due to this change, it might not be possible to roll back after upgrading to Datameer 6.3, depending on the configuration of your artifacts. For example, if import jobs and workbooks are configured to purge historical data and only keep the last one result, the final artifacts are stored as Parquet files, and prior versions of Datameer cannot read them. 

External authentication changes

As of Datameer 6.3, its' required to use ports 389/636 to connect to LDAP or the ports 3268/3269 to connect to Active Directory.

Upgrading to versions 7.0+

Ensure that Datameer application server, as well all data nodes, have Java 1.8 (Oracle recommended)

Upgrading to version 7.2

If you are upgrading to Datameer 7.2 from a 6.1.x or earlier version, must first upgrade to a 7.1.12 or later 7.1.x release, in order to trigger an important Database schema migration processes.

Upgrading with Kerberos

Keep the following in mind if you use Kerberos:

• If you used Kerberos prior to 5.11, you need to install the plug-in during upgrade.
• If you are running a Kerberos-secured cluster with impersonation enabled, you need to run the secure_hdfs_tool.sh command line tool when upgrading to versions 6 and above. For versions 6.1 and above, run the command after upgrading, starting, and stopping Datameer. Once you've run the command, restart Datameer.

Migrating workbooks and other artifacts when upgrading

Workbooks and other JSON files downloaded as a backup in older versions of Datameer are not supported in newer versions of Datameer.

When upgrading to a newer version of Datameer, ensure that all needed workbooks and files are part of the migration process so that they can be used in your new version of Datameer.

Upgrade Planning

• Before upgrading Datameer, a plan should be made for application downtime scheduling, notifications, and creating a maintenance window for Datameer. Please take note of the system requirements and consider upgrading the MySQL service for Datameer's application database from 5.1 to 5.5 or 5.6, if applicable.
• Backed up Datameer files need to be included in the migration process. Previous files that aren't part of the migration process aren't supported in newer versions.
• Jobs will need to be set to stop executing prior to the upgrade process. This could be done e.g. by Pause Job Scheduler.
• Request possible assistance from the database administrator in case credentials for database are not available to the application owner.
• Custom plug-ins which were created by Using the Plug-in SDK of a former Datameer version need to be re-compiled!
• Since it is recommended to not copy old configuration files or scripts to the new location, note the changes you have made in the previous setup. This information you will need to make necessary changes in the new configuration files.
  
  • As of Datameer 7.4, a property file exists so Job Scheduler and Event Bus settings adjusted in the UI are read during Datameer start up.
    • A properties file called "overrides.properties" isn't written on Datameer but your systems HOME folder. (Path = <home>/.datameer/overrides.properties)
    • This property file is auto-created when adjusting the Event Bus or Job Scheduler settings under the Admin tab. This file can also be manually added and edited.
    • This is the last properties  file read on start up. (E.g., it overrides other property files like default.properties and deployMode.properties)
      
    • This file can be modified to allow for storing and the restoring of custom properties.
      

Backup Keyfiles and Keystore

If you have set up password encryption and/or enabled TLS  with custom certificates , backup your Keystore and Keyczar keyfiles.

Upgrade the Application

1. Stop the application.

   <Datameer Application Folder>/bin/conductor.sh stop

2. Unzip the upgrade file.
   Move the MySQL JDBC driver located in <Datameer path>/das-data/jdbc-jars, as described into the  Install the JDBC Database Drivers section of the Installation Guide.
   In case you are using Datameer with MySQL as an application database, please check that database mode is configured accordingly in your  etc/das-env.sh  file

   export DAS_DEPLOY_MODE=live

3. If upgrading in Workgroup or Enterprise versions, users may want to consider allocating additional memory in etc/das-env.sh. 

   # Adjust max available memory (-Xmx) according to your needs
   # WARNING: Path variables that may contain blanks should be added to jetty.sh start_das() method (see DAP-6342)
   export JAVA_OPTIONS="-Xmx2048m -XX:MaxPermSize=384m -Xms256m -XX:MaxNewSize=448m -XX:SurvivorRatio=6 -XX:+UseConcMarkSweepGC -XX:CMSInitiatingOccupancyFraction=80 -XX:+HeapDumpOnOutOfMemoryError -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled"
export JAVA_OPTIONS="$JAVA_OPTIONS -Dfile.encoding=utf-8"

4. Consider changing the container sizing of the Map, Reduce, and AM containers, which respectively correspond to MapReduce and Tez jobs. To do so, change the settings of the following properties:

   das.job.map-task.memory=2048
   das.job.reduce-task.memory=2048
   das.job.application-manager.memory=2048

5. If existing, copy the files from the das-data folder of the old distribution to the new location. Keep the original das-data information as a backup.

   cp -r /<old-location>/das-data /<new-location>/
   

6. Users need to check, and update if necessary, the folder where plug-in configurations are stored.

   Open the file system of the previous Datameer version you are upgrading from and navigate to the default.properties file.

   Search for the property file that defines the folder where plug-in configurations are stored.

   # Defines the folder where to store plugin configurations
   system.property.plugin.configs.dir=<folder name>

   Open the file system of the upgrade version of Datameer and find the same property in the default.properties file.

   Check or update the new property value to be the same folder name in the previous version.

   Copy the contents of the previous plug-in configurations folder into the file system of the new upgraded version of Datameer.

7. If you made changes in your conf/ directory previously (like changing live.properties and log4j-<xyz>.properties), you need to apply** the same changes to the new conf/ directory of your upgraded instance.

8. Copy over the native libraries that you have added to Datameer (if this applies). You don't have to copy over the native libraries that are already bundled with Datameer.

   cp -r /<old-location>/lib/native/* /<new-location>/lib/native/

9. If you have made changes to the conductor.sh script (for example, to enable SSH), apply** these changes to /<new-location>/bin/conductor.sh again. Notice JAVA_OPTIONS has been moved to etc/das-env.sh

10. Migrate the SSL values from the previous start.ini to the new one.

    # Set up a demonstration keystore and truststore
    jetty.keystore=etc/keystore
jetty.truststore=etc/keystore

    # Sets the demonstration passwords
    # OBF passwords aren't secure. They are only protected from casual observation.
    # See http://www.eclipse.org/jetty/documentation/current/configuring-security-secure-passwords.html
    jetty.keystore.password=OBF:1vny1zlo1x8e1vnw1vn61x8g1zlu1vn4 # storepwd
jetty.keymanager.password=OBF:1u2u1wml1z7s1z7a1wnl1u2g # keypwd
jetty.truststore.password=OBF:1vny1zlo1x8e1vnw1vn61x8g1zlu1vn4 # storepwd

11. Copy over files from etc/custom-jars (these files could be database drivers or 3rd party libraries).
12. If you are using custom Datameer plugins (jar archives stored under etc/custom-plugins), update those to be in sync (API compatible) with the new version of Datameer and be sure to remove jar files related to older versions from etc/custom-plugins.

Database Upgrade

Follow the steps for upgrading your MySQL or HSQL database. As of Datameer 7.4: MariaDB is supported as an alternative to MySQL.

Upgrade the MySQL database

1. To upgrade the database, enter the following command:

   bin/upgrade_db.sh 

   If either the structure of the MySQL database or any of the tables in the database will be modified by the Datameer upgrade, running this command automatically creates a dump of the database.

   • Ensure that the script is not executed under root, but by the same user account that starts and stops Datameer.
   • Run the upgrade script directly from the <INSTALLDIR>. Preface the script with the bin directory.

2. If your database name is different than the default dap or the database runs on a different server or customized port, you will need to provide the additional arguments:

   bin/upgrade_db.sh -h [db hostname] -o [db port] -n [db name] -u [db username] -p [db password]

3. Check to ensure your database character encoding is set to UTF-8.
   In the Database, enter:

   SELECT DEFAULT_CHARACTER_SET_NAME FROM INFORMATION_SCHEMA.SCHEMATA WHERE SCHEMA_NAME = '<The name of your Datameer database>';

   If UTF8 was returned, open the default properties and comment in the setting system.property.hibernate.connection.characterEncoding=utf8.
   If something other than UTF8 was returned, change the database character encoding setting to UTF8 or special characters may show as corrupt. 

4. To finish the upgrade, restart the application.
   

   <Datameer Application Folder>/bin/conductor.sh start

MySQL thread stack overrun during database upgrade

If you receive the above error message during an update, raise the MySQL stack size. For example,

mysqld -O thread_stack=192k

or higher if necessary.
 

Migrating from HSQL to MySQL

Datameer provides a tool to migrate data from an HSQL file database to a MySQL database:

1. Set-up MySQL as per the Installation Guide

2. Migrate HSQL database to MySQL

       bin/migrate-db-tool.sh hsql-file:<Datameer user path>/Datameer/<version>/das-data/database mysql

   * Ensure this script is being run from root Datameer installation folder.

Upgrade the HSQL database

You have to use the script bin/upgrade_hsql_db.sh to upgrade your HSQL database to a higher version. Ensure this script is run from the root Datameer installation folder.

usage: upgrade_hsql_db.sh
 -ndd,--new-das-data <folder>           new das-data folder
 -odd,--old-das-data <folder>           old das-data folder

With the -pi option you define the previous datameer installation. We need this folder to find the HSQL database we want to upgrade. 

We backup your previous database into your current installation folder. Furthermore we use all upgrade scripts with name pattern  upgrade-<version>.hsql in your current installation folder.
As an option you can use the parameters -ndd and -odd . These parameters define the new/old location of your das-data folder. When you running datameer in LOCAL mode it could be possible that you want to copy your das-data folder to a new location. A common use case is when the das-data folder is saved within the installation directory.

Here is an example of what it looks like when upgrading a database.

bin/upgrade_hsql_db.sh --old-das-data <file path>/<file version>/das-data --new-das-data <file path>/<file version>/das-data

#Detect databases
detect old database [/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/database/hsql-db]
detect new database [/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/database/hsql-db]

Upgrade datameer database version [2.0.0.6] to version [2.0.2.0]

#Assert datameer is running
No

#Copy Das Data
copy das-data from [/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data] to [/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data]

#Upgrade starts...
Process upgrade scripts on database jdbc:hsqldb:file:das-data/database/hsql-db
	upgrade-2.0.1.hsql

#Update schema-version
set system.schemaVersion on database [/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/database/hsql-db] to [2.0.1]


#Update data uri's [/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data] -> [/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data]

log4j:WARN No appenders could be found for logger (org.hibernate.type.BasicTypeRegistry).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more info.
Converting 12 data entries
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/fileuploads/1/1 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/fileuploads/1/1
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/fileuploads/2/2 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/fileuploads/2/2
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/fileuploads/3/3 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/fileuploads/3/3
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/fileuploads/4/4 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/fileuploads/4/4
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/fileuploads/5/5 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/fileuploads/5/5
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/workbooks/6/6 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/workbooks/6/6
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/workbooks/7/7 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/workbooks/7/7
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/workbooks/8/8 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/workbooks/8/8
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/workbooks/9/9 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/workbooks/9/9
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/fileuploads/10/10 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/fileuploads/10/10
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/workbooks/11/11 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/workbooks/11/11
file:/Users/marko/Desktop/Datameer-2.0.1-0.20.2/das-data/fileuploads/10/12 -> file:/Users/marko/Development/Java/datameer/dap/build/dist/Datameer-2.0.2-0.20.2/das-data/fileuploads/10/12

Check or Update YARN Path Settings

 Check or update YARN application classpath and LD_LIBRARY path.  The  path settings are used to lookup and load libraries , therefor  incorrect path settings may lead into unexpected behavior .

1. Start Datameer

2. Open the Administration tab

3. Open the Hadoop Cluster options

4. Check or update YARN application classpath and LD_LIBRARY path

    

$HADOOP_CONF_DIR, $HADOOP_COMMON_HOME/*, $HADOOP_COMMON_HOME/lib/*, $HADOOP_HDFS_HOME/*, $HADOOP_HDFS_HOME/lib/*, $HADOOP_MAPRED_HOME/*, $HADOOP_MAPRED_HOME/lib/*, $YARN_HOME/*, $YARN_HOME/lib/*

 $HADOOP_CONF_DIR, $HADOOP_COMMON_HOME/*, $HADOOP_COMMON_HOME/lib/*, $HADOOP_HDFS_HOME/*, $HADOOP_HDFS_HOME/lib/*, $HADOOP_MAPRED_HOME/*, $HADOOP_MAPRED_HOME/lib/*, $HADOOP_YARN_HOME/*, $HADOOP_YARN_HOME/lib/*

yarn classpath | tr ':' ','

Recompile Plug-ins

Custom plug-Ins which were created by using the plug-in SDK need to be recompiled. Adjust the versioning and create the plug-in again under the new plug-in SDK.

All plug-ins used that aren't a part of standard distribution, e.g., Advanced Governance package, require an upgrade.

1. Check if any plug-ins are located in <OLD Datameer version installation folder>/etc/custom-plugins/.
2. Request a Datameer representative to provide these plug-ins recompiled for the Datameer version you are upgrading to.
3. Copy the new versions of the plugins to <NEW Datameer version installation folder>/etc/custom-plugins/.

Validate the Upgrade

After the upgrade has completed, preform a test to validate that the upgrade was successful.

1. Start Datameer.
2. If applicable, upload recompiled plug-ins.
3. Validate the upgrade by preforming tests with baseline jobs that could previously be run without errors.
4. If applicable, test custom plug-ins.
5. Create a connection where the data is stored, import the data, add and modify the data in a workbook, and run the data.

If no unexpected errors occur the upgrade has been validated.

How to Roll Back to a Previous Database Version

When upgrading, a database dump is created by Datameer, the file name is similar to mysql_db_dump_<oldVer>.sql. If an upgrade failed (failing upgrade scripts / failing upgrade injectors during startup), the database paths might be conflicting, it is therefore necessary to restore the Datameer MySQL database dump. Follow the steps to complete this task.

1. Drop the new database, for example on the database server or the MySQL CLI.

   DROP DATABASE dap;

    

2. Using the mysql-init.sql script, create a new database.
   

   mysql [-h <dbhost>] -u root -p < bin/mysql-init.sql

    

3. Import and restore the previous database using the following shell command.
   

   mysql [-h <dbhost>] -u root -p dap < /path/to/dump_file_name