Page Comparison

Datameer doesn't does not generate Hive queries when connecting to Hive for data retrieval. Datameer can leverage a Thrift server or point directly to a Thrift warehouse path in HDFS when data is stored in a delimited fashion.

Anchor
hiveDataStore hiveDataStore

Configuring Hive as a Connection

In order to import from Hive, you must first create a connection .a connection.

To create a Hive connector:

1. Click the + (plus) button and select Connection or right-click in the browser and select Create new  >  Connection .
   
2. From the drop-down list select Hive as  as the connection type. Please see related warning at top of page.
   Image Modified

3. Enter the URI URL for the Hive metastore server, they . They usually run on port 10000 or 9083.
   Add any custom properties that might be necessary or desired when importing from Hive.

   Note
   icon false
   When adding a Hive connection that is accessing data stored in an S3 service, additional authentication is required. Add the following properties in the custom properties field:   fs.s3n.awsAccessKeyId=<ID> fs.s3n.awsSecretAccessKey=<KEY>

   

   High Availability (HA)

   If high availability (HA) for the Hive metastore Metastore is enabled on cluster, users must provide both thrift URLs separated by commas while creating the Hive connection. 

   Image Modified

   Additional Security Settings

   If you are connecting to Hive v0.10 or higher there are additional possible security settings. Select Yes to enable the secure Hive features and enter the metastore and HDFS principals.

   Metastore Principal: Service principal for the metastore thrift server. The special string _HOST is replaced automatically with the correct host name.

   HDFS Principal: Principal name of the Hadoop namenode.

   

4. Enter a description and click click Save.
   

...

After After configuring a Hive connection  with the wizard you can set up one or more more import jobs which  which access the Hive connection. 

Importing Data with a Hive Connector

 Please see related warning in above section regarding Hive Metastore deprecation.

1. Click the + (plus) button and selectImport JobJob or right-click in the browser and select Create new  > > Import Job.
2. Click Click Select Connection and  and choose the name of your Hive connection (here - Connection hive) then click Hive connection then click Next.
    Image Modified

3. Select a database.
   Image Removeda Database.

   Note
   title As of Datameer 7.5
   Datameer is able to compute the partition location while importing data from a partitioned Hive table, without fetching it from the HiveServer 2. This will improve the performance if the default partition location pattern is used. The setting can be configured globally within the plugin configuration page. The default value can be overwritten with the import job or data link wizard.

   Select a Partition Location Mode. Default Mode sets the Hive plugin to the globally defined partition location.  Compute default partition location calculates the partition location from the table location and partition specification. Fetch every partition from Hive obtains the actual partition location from the Hive server for each partition.  If you are unsure of the best choice, contact your Hive or Hadoop Administrator.
   Image Added

4. Choose the desired table.
   

   Supported Hive File Formats

   TEXTFILE - Plain text.

   SEQUENCEFILE - A flat file consisting of binary key/value pairs. It is extensively used in MapReduce as input/output formats.

   ORC (Optimized Row Columnar) - A file format that provides a highly efficient way to store Hive data. It was designed to overcome limitations of the other Hive file formats. Using ORC files improves performance when Hive is reading, writing, and processing data.

   RCFILE (Record Columnar File) - A data placement structure that determines how to store relational tables on computer clusters. It is designed for systems using the MapReduce framework.

   Note
   icon false
   Hive views are not supported and have been removed from the Table list. This due to the fact that a Hive view is a reference to non-materialized data. Since Datameer doesn't support running a Hive query, a Hive view isn't currently possible. If the filtering of the views is causing a performance issue, the property below must be added to the the Custom Properties in the Hive connector to remove the filter. Code Block das.hive.exclude.views=false Removing the filter to increase performance only allows views to be shown in the Table drop-down list, but they are still not supported for import. As of Datameer v6.3 Importing Hive views is supported using the /wiki/spaces/DAS60/pages/4631169571 connector with a HiveServer2 /wiki/spaces/DAS60/pages/4622979370 implementation. Image Modified

5. Partitions from Hive being imported have additional filtering options. This works for both string and date/time partitions.
   The following options are available: 

   • Filter by values - Select all available partition values for applying a value based filter.
   • Filter by fixed dates - Parse partition values for date and time constants and use start and end date for applying a time based filter for partitions. You have to specify a Java date pattern for each partition that is related to a date.
   • Filter by dynamic dates - Parse partition values for date and time constants and use start and end date expression for applying a filter based on a sliding time window. You have to specify a Java date pattern for each partition that is related to a date.

   This filter feature allows for import of data that has already been partitioned on the Hive server. To view how date/time partitions work in data links, refer to Linking to Data. To create partitions within a Datameer workbook, use the Time-based Partitions feature under the Define Fields section of the import.

   

6. Next, you see a preview of the imported data. 

   From the the Define Fields page page, you can change the the data field types and  and if necessary, set up up date parse patterns.
   By default, the preview includes the columns within the Hive partition but not the partition values. If needed, add the partition values to the import job by marking the included box under the column name.  

   Complex data field types (e.g., lists, structs, maps, and any nested data types) are represented as JSON and displayed as strings.
   You can extract and use this data with the JSON functions (i.e. JSON_ELEMENT, JSON_ELEMENTS, JSON_KEYS, JSON_MAP or JSON_VALUE) after loading this data into a workbook.

   Note
   Datameer jobs are compiled outside of Hive and don't have the same restrictions as Hive queries do. A workbook in Datameer isn't a direct analog to a Hive query and there are often concepts that don't translate back and forth as one-to-one features. A filter is similar to a where clause. It restricts the results on only include results that match the requested search criteria.

   

   Anchor
   HiveTypeMapping HiveTypeMapping

   Data type mapping when importing from a Hive table

   Hive types	Datameer types
   	String	Boolean	Float	Integer	Big_integer	Big_decimal	Date	List
   STRING
   VARCHAR
   CHAR
   BOOLEAN
   FLOAT
   DOUBLE
   DECIMAL
   TINYINT
   SMALLINT
   INT
   BIGINT
   DATE
   TIMESTAMP
   COMPLEX TYPES
   all others

   Additional advanced features are available to specify how to handle the data.
   

   Anchor
   time-based time-based

   Time-based partitions let workbook users partition data by date. This features allows calculations to run on all or only specific parts of the imported data. See Partitioning Data in Datameer for more information.
   

7. Review the schedule, data retention, and advanced properties for the job.
   

8. Add a description, click Save, and name the file.
   

Using a Custom Hive SerDe Library

SerDe is short for Serializer/Deserializer. A SerDe allows Hive to read in data from a table, and write it back out to HDFS in any custom format. You can write your own SerDe for your own data formats in Datameer.

...

1. Determine the version of Hive you're using. (e.g., 0.7)

2. Shutdown Datameer.

3. unzip <Datameer Install folder>/plugins/plugin-hive-<Hive Version>-<Datameer Version>.zip

4. Add the JAR file of your SerDe to: /lib/compile/hadoop and rezip.

5. Remove the corresponding .md5 file, if it exists. (e.g., plugin-hive-0.14.0-6.4.0.zip)

6. Restart Datameer.

If you run into problem, review Apache Hive - Custom SerDes and get in contact with the vendor of your 3rd party product/library.

...